It worked on a XTC321 Usb 2.0 RJ45 fast ethernet adapter" Was this review helpful? (Report this) 25 of 26 people found the following review helpful: Joris R Tested on Windows 7 19 May 2015(11 minutes after download) Installation: Stability: Compatibility: "Good driver for USB hub and USB-ethernet device.ID: USB\VID_0FE6&PID_9700" Was this review helpful? (Report this) Already tried it? Give your review.
If the driver listed is not the right version or operating system, search our driver archive for the correct version. Enter Corechips RD9700 USB2.0 To Fast Ethernet Adapter into the search box above and then submit. In the results, choose the best match for your PC and operating system.
Once you have downloaded your new driver, you'll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.
Actually, I didn't do anything, I just installed the drivers ....If I do ipconfig/all the DHCP server sees it disabled.I set the IPs manually and also the GatewayBut on DNS configuration, if I enter the google DNS, then it asks me for the HOST name and DOMAIN, I have no idea what to write there.Even on WINS configuration I don't know what to set.
Adapter installed. BUT same problem, I don't understand. On windows 10 it works here not .... Yet it is configured correctly.Note: d-link des 1005d Switch this time lights up, but with yellow light, not green. This means a connection of not 100 but 10Mbps.Both devices are installed correctly. I used a program to identify the hardware.The drivers are correct, both those of Nilox (manufacturer Asix Electronix) and Kingleen (manufacturer Kontron Industrial Computers Source).The Switch reports that kingleen has a 10Mbps connection speed, while the Nilox goes at 100Mbps. 2b1af7f3a8